Tethering inverso di un iPhone 4s con chip Murata wifi / bt guasto

Naviga le tue risposte
2

Ho trovato un modo per invertire il collegamento di un dispositivo iOS o collegarlo a Internet solo tramite il cavo USB. Molti metodi precedenti per eseguire questa operazione richiedevano una connessione dati attiva in quanto si imposterebbe manualmente il proxy per quell'interfaccia per utilizzare un tunnel tcp USB. L'host è un Mac che esegue l'anteprima degli sviluppatori di MacOS High Sierra. L'idevice è un iPhone 4s con jailbroken iOS 7.1.2. Il modo in cui l'ho fatto è il seguente:

Crea un tunnel pppd. Per prima cosa ho installato libimobiledevice per configurare un tunnel tcp per accedere con ssh al mio idevice più tardi: 

iproxy 2022 22

quindi un tunnel dedicato per pppd da usare: 

iproxy 4444 4444

Ora accedo al mio idevice: ssh localhost -p 2022

Ora, il tunnel di pppd, prima dal mio idevice:

pppd noipdefault nodetach usepeerdns pty "nc -l -p 4444 localhost"

Si noti che sto ascoltando una connessione dal client. Questo perché iproxy consente solo l'avvio di una connessione dal computer host. Ora, sul computer host: 

pppd 172.16.1.2:172.16.1.3 proxyarp usehostname ms-dns 8.8.8.8 nodetach pty "nc localhost 4444"

Sto usando nc come mia connessione, ancora una volta a causa della limitazione della connessione solo dell'host.

Dopo alcuni secondi, sia l'host che il client pppd elaborano i dettagli della connessione: 

client pppd:
Wed Sep 13 00:36:28 2017 : publish_entry SCDSet() failed: Success!
Wed Sep 13 00:36:28 2017 : publish_entry SCDSet() failed: Success!
Wed Sep 13 00:36:28 2017 : set_up_tty, can't set controlling terminal: Operation not permitted
Wed Sep 13 00:36:28 2017 : Using interface ppp0
Wed Sep 13 00:36:28 2017 : Connect: ppp0 <--> /dev/ttys003
Wed Sep 13 00:36:32 2017 : local  IP address 172.16.1.3
Wed Sep 13 00:36:32 2017 : remote IP address 172.16.1.2
Wed Sep 13 00:36:32 2017 : primary   DNS address 8.8.8.8
Wed Sep 13 00:36:32 2017 : secondary DNS address 8.8.8.8
host pppd: 
Wed Sep 13 00:36:19 2017 : publish_entry SCDSet() failed: Success!
Wed Sep 13 00:36:19 2017 : publish_entry SCDSet() failed: Success!
Wed Sep 13 00:36:19 2017 : set_up_tty, can't set controlling terminal:       
Operation not permitted
Wed Sep 13 00:36:19 2017 : Using interface ppp0
Wed Sep 13 00:36:19 2017 : Connect: ppp0 <--> /dev/ttys015
Wed Sep 13 00:36:20 2017 : found interface en1 for proxy arp
Wed Sep 13 00:36:20 2017 : local  IP address 172.16.1.2
Wed Sep 13 00:36:20 2017 : remote IP address 172.16.1.3
Wed Sep 13 00:36:20 2017 : Committed PPP store

L'idevice è ora connesso al mio computer host. Ho installato adv-cmds e network-cmd da Cydia, e così ho ifconfig, route, etc disponibili. Dal mio idevice: 

$ ifconfig

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000 
pdp_ip0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
pdp_ip1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
pdp_ip2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
pdp_ip3: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
en0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
    ether c2:9f:42:7f:cd:1d 
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 172.16.1.3 --> 172.16.1.2 netmask 0xffff0000

Funziona! Ma non posso ancora usarlo. L'idevice non ha percorsi per questa nuova interfaccia. La mia rete domestica si trova sulla rete 172.16 e desidero raggiungere tutti i dispositivi su di essa. Quindi corro: 

route add -net 172.16 172.16.1.2

Ora, se apro Safari, posso accedere a tutti i dispositivi su quella rete. Se vado oltre, e faccio 

route add default 172.16.1.2

Posso accedere a tutti gli indirizzi IP numerici, esterni e interni! Tuttavia, tutti i nomi di dominio restituiscono il temuto "Safari non può aprire la pagina perché il tuo iPhone non è connesso a Internet". Vediamo la configurazione del mio percorso: 

$ netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            172.16.1.2         UGSc        0        0   ppp0
127                127.0.0.1          UCS         0        0    lo0
127.0.0.1          127.0.0.1          UH         11    49203    lo0
172.16             172.16.1.2         UGSc        2        0   ppp0
172.16.1.2         172.16.1.3         UH          4       12   ppp0
224.0.0/4          lo0                UCS         0        0    lo0

Ho avuto la sensazione che iOS includesse alcuni strumenti relativi al sistema preinstallati, ed è così che ho trovato pppd. 

$ ls /usr/sbin
BTAvrcp     BlueTool  addNetworkInterface  distnoted          ipconfig         mkfile   nvram     rtadvd    startupfiletool  traceroute6  vipw       zic
BTLEServer  absd      arp          fairplayd.H1       mDNSResponder    natd     pppd      scselect  sysctl       trpt         wifid
BTMap       ac        aslmanager       filecoordinationd  mDNSResponderHelper  ndp      pwd_mkdb  scutil    syslogd      update       wirelessproxd
BTServer    accton    daily        iostat         mediaserverd     notifyd  racoon    sshd  traceroute   vifs         zdump

addNetworkInterface è uno strumento che non ho mai visto prima. 

/usr/sbin/addNetworkInterface --help
options:

[-i <interface>]
[-c <controller>]
[-p] persistent host detection
[-s] route logging to syslog

Proviamo con ppp0: 

/usr/sbin/addNetworkInterface -i ppp0 
Looking for interface ppp0
Looking for all controllers
Looking for network interfaces...

Non sembra fare nulla. Forse il DNS non viene rilevato? In / usr / sbin ho trovato anche scutil, che avevo visto prima, in OS X. Quindi, 

   $ scutil --dns
resolver #1

resolver #2
  domain   : local
  options  : mdns
  timeout  : 5
  order    : 300000

resolver #3
  domain   : 254.169.in-addr.arpa
  options  : mdns
  timeout  : 5
  order    : 300200

resolver #4
  domain   : 8.e.f.ip6.arpa
  options  : mdns
  timeout  : 5
  order    : 300400

resolver #5
  domain   : 9.e.f.ip6.arpa
  options  : mdns
  timeout  : 5
  order    : 300600

resolver #6
  domain   : a.e.f.ip6.arpa
  options  : mdns
  timeout  : 5
  order    : 300800

resolver #7
  domain   : b.e.f.ip6.arpa
  options  : mdns
  timeout  : 5
  order    : 301000

Hmm, no 8.8.8.8 (google public dns) E il resolver # 1 è vuoto. Vediamo se iOS vede persino ppp0: 

$ scutil --nwi
IPv4 network interface information
 No IPv4 states found

IPv6 network interface information
 No IPv6 states found

Aha, iOS non vede la mia interfaccia ppp0. Tuttavia, mi capita di avere un L2TP  server VPN in esecuzione al 172.16.12.1. Ho provato ad aggiungere una VPN tramite le impostazioni per esso, e si connette! Ho accesso a Internet e DNS si sta risolvendo. Vediamo cosa è cambiato: 

$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000 
pdp_ip0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
pdp_ip1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
pdp_ip2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
pdp_ip3: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether c2:9f:42:7f:cd:1d 
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 172.16.1.3 --> 172.16.1.2 netmask 0xffff0000 
ppp1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280
    inet 172.17.0.6 --> 172.16.12.1 netmask 0xffff0000

Ok, proviamo lo scutil: 

$ scutil --nwi
IPv4 network interface information
    ppp1 : flags 0x5 (IPv4,DNS)
           reach 0x3 (Reachable,Transient Connection)
           VPN server: 172.16.12.1
           Signature Hash: <data> 0x3287f850c5bceebf3963027f203dfd222b245973
           generation 890780619714

IPv6 network interface information
 No IPv6 states found

Aha, iOS vede quella connessione VPN. Vediamo ora le tabelle di routing: 

$ netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            172.16.12.1        UGSc        1        0   ppp1
127                127.0.0.1          UCS         0        0    lo0
127.0.0.1          127.0.0.1          UH         11    49349    lo0
172.16             172.16.1.2         UGSc        2        0   ppp0
172.16.1.2         172.16.1.3         UH          3       12   ppp0
172.16.12.1        172.17.0.7         UH          2        0   ppp1
172.17             ppp1               USc         0        0   ppp1

Si noti che il mio server vpn L2TP assegna gli indirizzi nella rete 172.17. Interessante ... ma è esattamente quello che ho fatto con il mio setup di pppd.

Proviamo a vedere cosa vede scutil. Puoi entrare in modalità interattiva semplicemente invocando scutil senza argomenti. 

$ scutil
> list
  subKey [0] = Plugin:IPConfiguration
  subKey [1] = Plugin:InterfaceNamer
  subKey [2] = Setup:
  subKey [3] = Setup:/
  subKey [4] = Setup:/Network/Global/IPv4
  subKey [5] = Setup:/Network/HostNames
  subKey [6] = Setup:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D
  subKey [7] = Setup:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D/Interface
  subKey [8] = Setup:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D/com.apple.CommCenter
  subKey [9] = Setup:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D/com.apple.CommCenter/Setup
  subKey [10] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97
  subKey [11] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97/IPv4
  subKey [12] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97/IPv6
  subKey [13] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97/Interface
  subKey [14] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97/Proxies
  subKey [15] = Setup:/Network/Service/261FD5D3-87FF-4D60-A3C2-66A8B785BFF7
  subKey [16] = Setup:/Network/Service/261FD5D3-87FF-4D60-A3C2-66A8B785BFF7/Interface
  subKey [17] = Setup:/Network/Service/261FD5D3-87FF-4D60-A3C2-66A8B785BFF7/com.apple.CommCenter
  subKey [18] = Setup:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2
  subKey [19] = Setup:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2/Interface
  subKey [20] = Setup:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2/com.apple.CommCenter
  subKey [21] = Setup:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2/com.apple.CommCenter/Setup
  subKey [22] = Setup:/Network/Service/B7F49FAB-68BA-483B-8867-8190FD5B94ED
  subKey [23] = Setup:/Network/Service/B7F49FAB-68BA-483B-8867-8190FD5B94ED/Interface
  subKey [24] = Setup:/Network/Service/B7F49FAB-68BA-483B-8867-8190FD5B94ED/com.apple.CommCenter
  subKey [25] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7
  subKey [26] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPSec
  subKey [27] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPv4
  subKey [28] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPv6
  subKey [29] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/Interface
  subKey [30] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/PPP
  subKey [31] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/Proxies
  subKey [32] = Setup:/System
  subKey [33] = State:/IOKit/LowBatteryWarning
  subKey [34] = State:/IOKit/PowerAdapter
  subKey [35] = State:/IOKit/PowerManagement/CurrentSettings
  subKey [36] = State:/IOKit/PowerManagement/SystemLoad
  subKey [37] = State:/IOKit/PowerManagement/SystemLoad/Detailed
  subKey [38] = State:/IOKit/PowerSources/InternalBattery-0
  subKey [39] = State:/Network/Global/DNS
  subKey [40] = State:/Network/Global/IPv4
  subKey [41] = State:/Network/Global/Proxies
  subKey [42] = State:/Network/Interface
  subKey [43] = State:/Network/Interface/en0/Link
  subKey [44] = State:/Network/Interface/lo0/IPv4
  subKey [45] = State:/Network/Interface/lo0/IPv6
  subKey [46] = State:/Network/Interface/lo0/LinkQuality
  subKey [47] = State:/Network/Interface/pdp_ip0/LinkQuality
  subKey [48] = State:/Network/Interface/pdp_ip1/LinkQuality
  subKey [49] = State:/Network/Interface/pdp_ip2/LinkQuality
  subKey [50] = State:/Network/Interface/pdp_ip3/LinkQuality
  subKey [51] = State:/Network/Interface/ppp0/IPv4
  subKey [52] = State:/Network/Interface/ppp1/IPv4
  subKey [53] = State:/Network/MulticastDNS
  subKey [54] = State:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D
  subKey [55] = State:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D/com.apple.CommCenter
  subKey [56] = State:/Network/Service/261FD5D3-87FF-4D60-A3C2-66A8B785BFF7/com.apple.CommCenter
  subKey [57] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA
  subKey [58] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA/DNS
  subKey [59] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA/IPv4
  subKey [60] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA/IPv6
  subKey [61] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA/PPP
  subKey [62] = State:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2/com.apple.CommCenter
  subKey [63] = State:/Network/Service/B7F49FAB-68BA-483B-8867-8190FD5B94ED/com.apple.CommCenter
  subKey [64] = State:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/DNS
  subKey [65] = State:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPv4
  subKey [66] = State:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPv6
  subKey [67] = State:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/PPP
  subKey [68] = State:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/Proxies
  subKey [69] = State:/Network/mDNSResponder/DebugState
  subKey [70] = com.apple.CFNetwork.netcompat.HTTPPipelining:VPN.RemoteAddress=172.16.12.1
  subKey [71] = com.apple.CFNetwork.netcompat.TLSFalseStart:VPN.RemoteAddress=172.16.12.1
  subKey [72] = com.apple.CFNetwork.netcompat:com.apple.CFNetwork.netcompat.lastpurge
  subKey [73] = com.apple.MobileInternetSharing

Quindi iOS ha un sacco di interfacce configurate. Sono interessato solo a quello attivo, il mio vpn l2tp, che è ppp1. Quindi: 

> get State:/Network/Global/IPv4
> d.show
<dictionary> {
  PrimaryInterface : ppp1
  PrimaryService : FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7
  Router : 172.16.12.1
}

> get State:/Network/Global/DNS
> d.show
<dictionary> {
  ServerAddresses : <array> {
    0 : 8.8.8.8
    1 : 8.8.4.4
  }
}

Quindi è definito lì. Prendiamo tutti i valori per il PrimaryService: 

> get State:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/DNS
> d.show 
<dictionary> {
  ServerAddresses : <array> {
    0 : 8.8.8.8
    1 : 8.8.4.4
  }
SupplementalMatchDomains : <array> {
    0 : 
  }
  SupplementalMatchOrders : <array> {
    0 : 100000
  }
}

> get State:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPv4
> d.show 
<dictionary> {
  Addresses : <array> {
    0 : 172.17.0.7
  }
  DestAddresses : <array> {
    0 : 172.16.12.1
  }
InterfaceName : ppp1
  NetworkSignature : VPN.RemoteAddress=172.16.12.1
  OverridePrimary : 1
  Router : 172.16.12.1
  ServerAddress : 172.16.12.1
}

> get State:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/PPP
> d.show 
<dictionary> {
CommRemoteAddress : 172.16.12.1
  ConnectTime : 37417
  IPCPCompressionVJ : 0
  InterfaceName : ppp1
  LCPCompressionACField : 1
  LCPCompressionPField : 1
  LCPMRU : 1500
  LCPMTU : 1280
  Status : 8
}

Tutti definiti. Vediamolo senza il Lpv L2TP connesso: 

> list
  subKey [0] = Plugin:IPConfiguration
  subKey [1] = Plugin:InterfaceNamer
  subKey [2] = Setup:
  subKey [3] = Setup:/
  subKey [4] = Setup:/Network/Global/IPv4
  subKey [5] = Setup:/Network/HostNames
  subKey [6] = Setup:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D
  subKey [7] = Setup:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D/Interface
  subKey [8] = Setup:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D/com.apple.CommCenter
  subKey [9] = Setup:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D/com.apple.CommCenter/Setup
  subKey [10] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97
  subKey [11] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97/IPv4
  subKey [12] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97/IPv6
  subKey [13] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97/Interface
  subKey [14] = Setup:/Network/Service/23C902DC-A50E-4873-8A40-F9EFF62CCE97/Proxies
  subKey [15] = Setup:/Network/Service/261FD5D3-87FF-4D60-A3C2-66A8B785BFF7
  subKey [16] = Setup:/Network/Service/261FD5D3-87FF-4D60-A3C2-66A8B785BFF7/Interface
  subKey [17] = Setup:/Network/Service/261FD5D3-87FF-4D60-A3C2-66A8B785BFF7/com.apple.CommCenter
  subKey [18] = Setup:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2
  subKey [19] = Setup:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2/Interface
  subKey [20] = Setup:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2/com.apple.CommCenter
  subKey [21] = Setup:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2/com.apple.CommCenter/Setup
  subKey [22] = Setup:/Network/Service/B7F49FAB-68BA-483B-8867-8190FD5B94ED
  subKey [23] = Setup:/Network/Service/B7F49FAB-68BA-483B-8867-8190FD5B94ED/Interface
  subKey [24] = Setup:/Network/Service/B7F49FAB-68BA-483B-8867-8190FD5B94ED/com.apple.CommCenter
  subKey [25] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7
  subKey [26] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPSec
  subKey [27] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPv4
  subKey [28] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/IPv6
  subKey [29] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/Interface
  subKey [30] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/PPP
  subKey [31] = Setup:/Network/Service/FF84E6AB-D5D4-4CE0-A9EE-FBAB5DE824C7/Proxies
  subKey [32] = Setup:/System
  subKey [33] = State:/IOKit/LowBatteryWarning
  subKey [34] = State:/IOKit/PowerAdapter
  subKey [35] = State:/IOKit/PowerManagement/CurrentSettings
  subKey [36] = State:/IOKit/PowerManagement/SystemLoad
  subKey [37] = State:/IOKit/PowerManagement/SystemLoad/Detailed
  subKey [38] = State:/IOKit/PowerSources/InternalBattery-0
  subKey [39] = State:/Network/Global/Proxies
  subKey [40] = State:/Network/Interface
  subKey [41] = State:/Network/Interface/en0/Link
  subKey [42] = State:/Network/Interface/lo0/IPv4
  subKey [43] = State:/Network/Interface/lo0/IPv6
  subKey [44] = State:/Network/Interface/lo0/LinkQuality
  subKey [45] = State:/Network/Interface/pdp_ip0/LinkQuality
  subKey [46] = State:/Network/Interface/pdp_ip1/LinkQuality
  subKey [47] = State:/Network/Interface/pdp_ip2/LinkQuality
  subKey [48] = State:/Network/Interface/pdp_ip3/LinkQuality
  subKey [49] = State:/Network/Interface/ppp0/IPv4
  subKey [50] = State:/Network/MulticastDNS
  subKey [51] = State:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D
  subKey [52] = State:/Network/Service/10D89B08-6E93-430C-BF49-A20670EFE79D/com.apple.CommCenter
  subKey [53] = State:/Network/Service/261FD5D3-87FF-4D60-A3C2-66A8B785BFF7/com.apple.CommCenter
  subKey [54] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA
  subKey [55] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA/DNS
  subKey [56] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA/IPv4
  subKey [57] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA/IPv6
  subKey [58] = State:/Network/Service/AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA/PPP
  subKey [59] = State:/Network/Service/AFA7F205-4647-4C6D-890E-9925C4909BE2/com.apple.CommCenter
  subKey [60] = State:/Network/Service/B7F49FAB-68BA-483B-8867-8190FD5B94ED/com.apple.CommCenter
  subKey [61] = State:/Network/mDNSResponder/DebugState
  subKey [62] = com.apple.CFNetwork.netcompat.HTTPPipelining:VPN.RemoteAddress=172.16.12.1
  subKey [63] = com.apple.CFNetwork.netcompat.TLSFalseStart:VPN.RemoteAddress=172.16.12.1
  subKey [64] = com.apple.CFNetwork.netcompat:com.apple.CFNetwork.netcompat.lastpurge
  subKey [65] = com.apple.MobileInternetSharing

Tutta la configurazione è sparita. Ecco perché non funziona. Notare che il servizio AAAAAAAA-AAAA-AAAA-AAAA-AAAAAAAAAAAA è uno che ho provato a fare manualmente e ad aggiungere tutte le chiavi come se fossero state configurate per ppp1 ma sostituendole con ppp0 ma non ha funzionato.

Quindi, è possibile aggiungere ppp0 tramite scutil o in un altro modo, in modo che gli indirizzi DNS funzionino, e iOS è consapevole che si tratta di una connessione Internet, che le app possono utilizzare?

    
posta Daniel Rodriguez 13.09.2017 - 17:16
fonte

0 risposte

Leggi altre domande sui tag

La scheda di rete Boot Camp non funziona? Come uccidere e riavviare la lingua di input in macOS?