mac, non posso usare l'IP diretto 192.168.0. #, continuando a ottenere 192.168.1. #

-1

non so da quando, il mio mac crea una sottorete e ottengo 192.168.1. # e non 192.168.0. # ip, il vero router ha 192.168.0.1, ma qualcosa sta creando la sottorete e non posso lavorare direttamente con dispositivi anothers perché sono in una sottorete diversa; qualcuno può conoscere questo problema?
qui il mio ifconfig:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=3<RXCSUM,TXCSUM>
    inet6 ::1 prefixlen 128 
    inet 127.0.0.1 netmask 0xff000000 
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
    nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether ac:bc:32:cc:75:ff 
    inet6 fe80::aebc:32ff:fecc:75ff%en0 prefixlen 64 scopeid 0x4 
    inet 192.168.1.113 netmask 0xffffff00 broadcast 192.168.1.255
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
en1: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
    options=60<TSO4,TSO6>
    ether 4a:00:00:fd:1d:80 
    media: autoselect <full-duplex>
    status: inactive
en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
    options=60<TSO4,TSO6>
    ether 4a:00:00:fd:1d:81 
    media: autoselect <full-duplex>
    status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 0e:bc:32:cc:75:ff 
    media: autoselect
    status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
    ether 9e:be:4d:77:31:92 
    inet6 fe80::9cbe:4dff:fe77:3192%awdl0 prefixlen 64 scopeid 0x8 
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether ae:bc:32:cc:a8:00 
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    member: en1 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 5 priority 0 path cost 0
    member: en2 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 6 priority 0 path cost 0
    nd6 options=1<PERFORMNUD>
    media: <unknown type>
    status: inactive

Ho eliminato il bridge, ma appare di nuovo. questo è il problema?

sul mio router il mio computer ha 192.168.0.7, ma dove o come viene convertito in 192.168.1. # con il router 192.168.1.1 ??

router

impostazionidiretedelcomputer

    
posta stackdave 19.11.2018 - 00:17
fonte

0 risposte

Leggi altre domande sui tag